The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares All Models Clutch

Sort by Title

Sort by Price

Page 10 of 13

1 2 3 4 5 6 7 8 9 10 11 12 13

RAM Clutch Kit Upgrade

CLA20305 Fits 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models

Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.

This clutch upgrade has the following advanges over the old two plate clutch:

Reduction in flywheel and clutch weight of approx. 1KG
Improved acceleration
Smoother gear changes at high RPM
Quicker engine decelleration
Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
Lighter handlebar clutch lever action
More precise clutch engagement and disengagement.
More progressive clutch engagement.
Increased ability to handle higher torque and horsepower.
Lower clutch disk wear (reduced maintenance)
Fewer parts (no intermediate plate, no second friction plate) to wear out
Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.

Kits are complete as shown including: flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. See CLA30399 for replacement clutch plate. See the expoded diagram on our technical documents page for more information about this part. Please note you will need 6 M8 Schnorr washers ENA14901 which are not included in the kit. See ENA37705 for replacement flywheel bolts

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£495.00

INC VAT

£412.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Cable

CAA13048 Fits 850 GT Cali

Dimensions:
Outer 1655mm free length 100mm

Clutch cable with adjuster for gearbox end

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

13093048 GU13093048 13 09 30 48
1309 3048 1309.3048 13.09.30.48

£17.10

INC VAT

£14.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Flywheel

ENA17670 Fits T3, T4, Spada ALL, G5, Mille GT, Cal 2, Strada 1000, T5, Cali 3 (small and medium valve), 1000S (series 2)

Dimensions:
230mm diameter

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

This part is available by special order, request a quote

17067050 GU17067050 17 06 70 50
1706 7050 1706.7050 17.06.70.50

£249.00

INC VAT

£207.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Spring

CLA10101 Fits Nuovo Falcone

Clutch spring

6 required per clutch change

This part is available by special order, request a quote

10084101 GU10084101 10 08 41 01
1008 4101 1008.4101 10.08.41.01

£5.50

INC VAT

£4.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Plate Kit

CLA10930 Fits Nuovo Falcone

Set of clutch plates

Consists of 1 x single sided friction plate, 7 x dual sided friction plates, 7 x intermediate plates

This part is available by special order, request a quote

£250.00

INC VAT

£208.33 EX VAT this is the price you will pay if you are ordering from outside the UK

RAM Clutch Replacement Friction Plate

CLA30399 Fits 1100 Sport ALL, V11 Sport ALL, Daytona, Centauro, Cali EV (1997-2006), 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100 (1994-1997

Replacement clutch plate for single plate RAM clutches

Torque setting for fitting this is 25Nm with a thread locking compound

This part is available by special order, request a quote

£146.00

INC VAT

£121.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Cable

CAA83941 Fits V7 Stone (2012-2013)

Dimensions:
1085mm outer, 140mm free length

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up

This part is available by special order, request a quote

883941 MG883941

£48.00

INC VAT

£40.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Plate Kit

CLA18022 Fits Convert

Set of clutch plates

Consists of 6 coated friction plates and 5 intermediate metal plates

This part is available by special order, request a quote

18082350 GU18082350 18 08 23 50
1808 2350 1808.2350 18.08.23.50

£96.00

INC VAT

£80.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Master Cylinder Cap and Rubber Brembo PSC 12/25

CLA81997 Fits Bellagio, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, 1200 Sport ALL, Stellvio ALL,

Dimensions:
58.5mm x 36.6mm cap

Clutch master cylinder cap and rubber kit for Brembo PSC 12/25 master cylinder

Brembo ref. 110270446

This part is available by special order, request a quote

AP8113997

£63.00

INC VAT

£52.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14903 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Factory tool for clutch centre gear nut, this is a superior design tool intended for repeated use

Designed to fit the original factory spec nut- this may not fit some aftermarket items. See TOA14651 for cheaper aftermarket tool

This part is available by special order, request a quote

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£70.00

INC VAT

£58.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 10 of 13

1 2 3 4 5 6 7 8 9 10 11 12 13